Click to enlarge
Ex e TNAE in Stainless Steel
Back to products
Control Unit ELB F-135

TNAML

TNAML range is 100% encapsulated, maintenance free design requiring only visual inspection to IEC/EN 60079-17. With 10 years operational warranty assures favourable total cost of ownership.  Fully recyclable, environmental friendly product with an High light output efficiency (>80%) – Less luminaries required for same lighting level. Two version standard or emergency light version, emergency light by LEDs. Optional battery powered, 90/180 minutes.

Self- cleaning glass and no condensation. Different type of mounting are possible, pole, ceiling and suspended mounting with adapted brackets.

SKU: TNAML Categories: , Tag:
Description

SPECIFICATIONS:
Housing: Anodized aluminum seawater resistant (Norsok 121)
Tempered glass
Voltage: 220-264 VAC 50/60Hz
IP rating: IP68
Operating temperature: -20°C to +55°C
Approvals: DEKRA 11ATEX0133
Ex-Codes: II 2 G Ex e mb II T6
II 3 G Ex nA nC IIC T6 Gc
II 2 D Ex tD A 21 IP68 T80°C
II 3 D Ex tD A 22 IP68 T80°C
Impact rating: IK 20 (20 joules) to IEC 60068-2- 75
Inspection: Visual in accordance with EN 60079- 17

Datasheet:
Ex-tech-Solution-DS-Lighting-TNAML-V2.pdf

Related products

IIB + H2 EJB in Copper Free Aluminium

The EJB range of Ex d IIB enclosures are manufactured copper free aluminum and designed for control, check, signal, automation, interruption and protection use. If required, several enclosures can be assembled on a frame with separate or common Ex e/i junction boxes. The enclosures can be delivered empty with U component certificate or supplied fully assembled according to customer need’s.
Quick view

Ex e XAWP pendant station in GRP

The XAWP pendant control stations range  is suitable for all kinds of industry but primarily used on cranes. The XAWP range is available with 2, 4, 6 or 8 pushbuttons with up to three contact blocks per operator. Custom double XAWP assemblies can be delivered to provide 12 or 16 way pendant control stations. The XAWP also features an optional double-step actuation mode for dual speed control. Mounting Assembly of the components only by us.
Quick view

Ex e DE1GW in Carbon or stainless steel

The junction boxes DEIGW Increased safety - Group IIC - Painted steel or stainless steel AISI 316L These junction boxes series are ideal for environments in the presence of chemical agents, corrosion resistant and suitable for very high and very low ambient temperatures. The maximum number of terminals depends of terminals section, operating temperature and required temperature class. They are equipped with a mounting plate and the fixing brackets. They can also be equipped with push buttons, selector switches, pilot lights, measurement instruments and are available in other sizes.
Quick view

Ex d IIB Motor Starters DE8BA – Cast Iron

The flameproof triple pole motor starters Group IIB  DE8BA in cast Iron with thermal overload relay are ideally suited for many applications. The range is available in three versions: • with thermal overload relay, without isolator, without fuses • with thermal overload relay, without isolator, with fuses • with thermal overload relay, with isolator, with fuses. A wide range of enclosures associated to a wide range of thermal overload relays, disconnecting switches with or without fuses, allows a customization of starters for various applications.
Quick view

Selector switches – Ex e

The Ex e Selector switches XBW4B-D/J/G, XBW5A-D/J/G are part of control and signalling units HarmAtex, they are dedicated to industries where an explosive atmosphere is present. They are suitable for demanding applications such as saline environments. They are used in an enclosure Ex e, Ex p or Ex t. Two offers: XBW4B-D/J/G... Metal bezel XBW5A-D/J/G... Plastic bezel. Mounting Panel cut-out Ø 22,5 mm. Up to 6 contacts block per actuator
Quick view

Ex d IIC XAEW in Aluminium

Rugged construction, the control stations XAEW, made in aluminum, are essentially dedicated to the control / command. Consisted of push-buttons, pilot lights, switches, potentiometers or ammeters, these control stations are equipped as standard with nickel-plated brass cable glands.  
Quick view

Ex e TNAE in Stainless Steel

The TNAE range in 316 stainless steel Ex e enclosures are designed for use in any environment where an explosive atmosphere may be present and are especially recommended for chemical agent environments, seawater corrosion resistance and extremes of low and high temperature. The maximum number of terminals depends of terminals section, operating temperature and required temperature class. They can also be equipped with push buttons, selector switches, pilot lights, measurement instruments.
Quick view

Motor starters & Power isolators

Catalog: Ex-tech-Solution-BR-Motor-starters-isolators-v2-1.pdf
Quick view